Select Page

SMR Gearbox Installation

SMR Gearbox Set up
Satisfactory overall performance depends on correct installation. lubrication and maintenance. as a result it is crucial that the instructions within the installation and servicing leaflet. provided with every gearbox. are followed very carefully. some of the important elements of belt and torque-arm set up are listed beneath.
1. Install pulley on gearbox input shaft as shut to the reducer probable, and mount reducer on driven shaft as close to bearing as useful. failure to carry out this will result in extra loads during the input shaft bearings and output bearings and could trigger their premature failure.
two. Install motor and wedge belt drive with the belt pull at somewhere around 90° towards the center line concerning driven and input shafts. this can permit tensioning of the wedge belt drive together with the torque arm which ought to preferably be in stress. if output hub runs anti-clockwise. torque arm ought to be positioned the correct.
3. lnstall torque-arm fulcrum on a rigid help to ensure the torque-arm will likely be at around suitable angles towards the center line with the driven shaft and also the torque arm situation bolt. make sure there’s sufficient take up during the turnbuckle for belt tension adjustment.
Maintain near.
Bell drive might be positioned in any practical postion. in case the torque arm will be to be used to tighten the belts, the drive should be at about tight angle for the line amongst the input and output shafts.
Bell drive can be located to your proper if wanted.
If output hub rotates clock-wise. position belt drive and torque arm in opposite path to that proven during the illustration.
Torque arm and belt get up.
Torque arm could be mounted towards the correct if preferred.

Tags:

worm gear box

As one of leading worm gear boxes manufacturers, suppliers and exporters of products, We offer sworm gear box and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm gear box

Recent Posts