Select Page

Leaf Chain

Leaf chains include pins and plates only and are larger in strength than roller chains. They’re suitable for duties like hoisting and pulling. Leaf chains conform to ANSI and have two sorts: AL and BL.
AL kind
To the use that static load is utilized with tiny concern of sporting.
BL type
For your use that put on resistance is needed due to the fact impact load is applied.
Collection of leaf chains
The chain dimension is chosen according to your following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable stress Notes:
one. Acting tension consists of the dead excess weight from the chain, the excess weight of the attachments and inertia.
2. In the event the chain velocity exceeds 30 m/min, use a roller chain.
Minimum sheave diameter: S.D = Chain pitch?¨¢5
Minimum width in between flanges: L = General length of pin?¨¢1.05
?If connecting pins are provided: L¡§R2L1?¨¢1.05
F.D = S.D + Highest link plate height (H) Note:?If dimension H exceeds 25.four,
F.D = S.D + 25.four could be adopted as the minimal flange outer diameter.
Periodical inspection and directions for replacement
Be sure you perform periodical inspection and lubrication to confirm safety and prolong chain life. Problems and directions for option are outlined in the following.
Dilemma:Circumferential dress in of plate
Resolution:Replace the chain if put on reduction gets to be 5 percent of H.
Dilemma:Oblique put on of plate and pin head
Alternative:Align the unit.
Dilemma:Abnormal protrusion or rotation of pin head
Alternative:Exchange the chain Lubricate and reduce overload.
Problem:Put on elongation
Remedy:Exchange the chain when its length gets 1.03L. Note: Put on elongation of a
chain lowers its tensile power.
Wear elongation of 3% lowers the tensile power by 18 %.
The wear lifestyle of chain can be enhanced by lubrication. Substitute the chain.
Dilemma:Cracked plate (one)Crack: From your hole of a link plate toward the finish on the link plate while in the route perpendicular to stress path.
Alternative:Substitute the chain with a chain of increased highest allowable stress, or decrease the load or dynamic (shock) load.
Challenge:Cracked plate (two)Crack: In an oblique course against stress route.
Remedy:Replace the chain, and guard from corrosive circumstances.
Difficulty:Broken plate(by large tension)
Resolution:Change the chain, and eradicate the induce of overload.
Challenge:Enlarged plate hole
Resolution:Substitute the chain, and reduce the bring about of overload.
Issue:Corrosion of pit
Option:Replace the chain, and shield from corrosive circumstances.


worm gear box

As one of leading worm gear boxes manufacturers, suppliers and exporters of products, We offer sworm gear box and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm gear box

Recent Posts