HK style roller chains

Downsizing Your System with Greater Electrical power Chains
HK sort roller chains conform to H sort of ANSI, and their thickness of inner and outer hyperlink plates are equal to individuals with the upcoming bigger size chain. For that reason, HK form roller chains are larger in tensile strength by about 20%and in highest allowable load by about 15% than people of regular roller chains. Because the bodyweight in the chains can be larger, HK type roller chains are suitable for the application of hefty duty at lower velocity.
Advisable employs
?Optimum for places where higher strength is needed but substantial and heavier chains are not able to be employed.
Selection of chains
Select a appropriate HK style roller chain based on “Low-speed selection”
For your highest allowable load, see the next table of dimensions.
HK kind roller chains can be found as much as triplex.
Sprockets
Use regular sprockets to get a simplex HK roller chain Because the transverse pitches are larger than people of standard chains during the situation of duplex or triplex, normal sprockets are unable to be utilized. Refer to the sprocket tooth profiles for HK
Connecting hyperlink and offset hyperlink
The tensile power of connecting links and offset backlinks are listed about the left, but the highest allowable load is lower than that from the base chain. Please check with us must you might have any questions. It is advisable to work with the connecting link of interference-fitted (FJ, HJ)
Never ever make the holes with the connecting plate more substantial and under no circumstances make the pins thinner to facilitate the function for fitting the pins in to the connecting plate, given that otherwise the fatigue strength is going to be lowered.
Variety of chains
Select a correct HK form roller chain based on “Low-speed selection”
For the optimum allowable load, see the following table of dimensions.
HK variety roller chains are available as much as triplex.
Sprockets
Use standard sprockets for any simplex HK roller chain Because the transverse pitches are bigger than these of typical chains within the case of duplex or triplex, common sprockets can not be utilized. Refer for the sprocket tooth profiles for HK
Connecting link and offset link
The tensile power of connecting backlinks and offset back links are listed within the left, however the optimum allowable load is decrease than that from the base chain. Please check with us ought to you’ve got any concerns. It can be advised to implement the connecting hyperlink of interference-fitted (FJ, HJ)
Under no circumstances make the holes of your connecting plate more substantial and hardly ever make the pins thinner to facilitate the function for fitting the pins in to the connecting plate, due to the fact otherwise the fatigue power are going to be lowered.